Christines Restoration Pages
Torque Box renewal & more
|
At this page I'm showing you what you could exspect if you wan't to replace the cowl side panel. The hardest work was to give this rough repro panel the correct shape of the original one. I marked this at one picture, so that you could compare the before (driver side) and after (passenger side) of that sheet metal. Also you can see that we welded in a new headlamp inner panel bracket and the first floor (to firewall) pan going in. The original welds to the fresh torque box complete this step... |
Christines Body Page 9 of 22
Back to Overview Bodywork | Previous Page | Next Page
Cutout of side cowl panel
|
New inner headlamp bracket/strong>
|
Compare the handworked sheet to the repro...
|
Fixed with using the original spotwelds
|
Workbench construction underneath
|
Sideview of the Workbench construction
|
Floor to firewall panel welded in
|
Before welding starts...
|
Cutout of front floor RH
|
To see welding of the torque box
|
Just from another angle
|
Not much left from the old torque box...
|
Page 9 of 22