Driver Side Floor & Torque Box Repair
- Details
- Category: Restoration Section
- Published on Monday, 13 May 2013 16:42
- Written by Klaus
- Hits: 136556
Christines Restoration Pages
Driver Side Floor & Torque Box Repair
|
Finishing the work at the right side, we switched over starting to work on the left one. Here is a little more work left, as you easily could easily see from the pictures. After getting all this rusty parts out, we started welding in the inner headlamp bracket, The next step was to replace the torque box and to fit a new floor to firewall panel. It wasn't a big suprise to see the damage at the inner frame, but I didn't exspected that the inner rocker looked like this. The Nightmare was going on, but in no way I will give up... |
Christines Body Page 10 of 22
Back to Overview Bodywork | Previous Page | Next Page
Cutout floor panel in pedal area
|
Torque box out on drivers side
|
Inner rocker eaten by rust...
|
This has to be fixed before new box comes in
|
The old Torque box
|
Inner headlight brace renewed
|
Some smaller repairs at the fender
|
New torque box welded in...
|
Preparing front floor panel for final cut
|
Reproducing spotsweld before welding starts
|
Bottom view after welding...
|
Footroom view after welding...
|
Page 10 of 22