Handmade Body Stiffening & Rusty Views...


Christines Restoration Pages
Handmade Body Stiffening & Rusty Views

   

Back to Main Page

 

 

 

As you remember "Never give up" is the goal of this restoration, I found the next bodyman helping me to bring Christine back to Live. I decided to bring the car around 200 miles away from my home which will cause a lot of travelling but I trust in Martin who cares from now for the progress. To take it all more serios now I decided also to start off now with an additonal complete sandblasting. For that it was neccessary to give the body an additional stiffining because we want to put the shell on a rotesserie. The new and hopefully the last bodyman Thomas put some additional steel into the car. Also you will find some more nice rust views at this page...

Mustang Logo line

Christines Body Page 5 of 22

Back to Overview Bodywork | Previous Page | Next Page


outer patch mouse
Still a rolling car
Inside steel bars
Trunk support
looking
first view
sandblast
How to fix the upper side
How to fix the lower frame
Only rust at the inner rocker
more rust
axle
wheelhouse
Bad patch at the rear frame
The tranny is still in...
The front floor is gone
bored
cutted off
rear fender
Rear fender driver side off
A look inside the inner rocker
 

 


Page 5 of 22

© www.early-mustang.com | Design by LernVid.com