Torque Box renewal & more
- Details
- Category: Restoration Section
- Published on Monday, 13 May 2013 16:41
- Written by Klaus
- Hits: 137475
Christines Restoration Pages
Torque Box renewal & more
|
At this page I'm showing you what you could exspect if you wan't to replace the cowl side panel. The hardest work was to give this rough repro panel the correct shape of the original one. I marked this at one picture, so that you could compare the before (driver side) and after (passenger side) of that sheet metal. Also you can see that we welded in a new headlamp inner panel bracket and the first floor (to firewall) pan going in. The original welds to the fresh torque box complete this step... |
Christines Body Page 9 of 22
Back to Overview Bodywork | Previous Page | Next Page
Cutout of side cowl panel
|
New inner headlamp bracket/strong>
|
Compare the handworked sheet to the repro...
|
Fixed with using the original spotwelds
|
Workbench construction underneath
|
Sideview of the Workbench construction
|
Floor to firewall panel welded in
|
Before welding starts...
|
Cutout of front floor RH
|
To see welding of the torque box
|
Just from another angle
|
Not much left from the old torque box...
|
Page 9 of 22
Trunk Repair
- Details
- Category: Restoration Section
- Published on Monday, 13 May 2013 16:53
- Written by Klaus
- Hits: 175308
Christines Restoration Pages
Trunk area repair
|
Another hard part of the body restoration is waiting here for you! The inner rocker and also the lower part of the a-pillar has to come out. To make it looking better I show how christine is looking with one original and one NOS fender again. If you have questions about that don't hesitate to ask me. After finishing the body section there will be five more sections you could follow in the future. There will be a Paint , Body and Interior reassembling, Electric and a Power train section. |
Christines Body Page 17 of 22
Back to Overview Bodywork | Previous Page | Next Page
Old front floor LH already out
|
Sometimes those repro panels are fitting fine
|
Final measuring before welding
|
What ever it is???
|
Inner rocker completly out
|
A-pillar taken out
|
Cowl panel clamped back again to check
|
Firewall extension going in
|
Left torque box mostly out
|
Inside view everything primered again
|
Easy working without the inner rocker panel
|
Just see the numerous factory spotwelds to the torque box
|
Page 17 of 22
Working at the left inner rocker
- Details
- Category: Restoration Section
- Published on Monday, 13 May 2013 16:50
- Written by Klaus
- Hits: 168070
Christines Restoration Pages
Working at the left inner rocker
|
Another hard part of the body restoration is waiting here for you! The inner rocker and also the lower part of the A-pillar has to come out. To make it looking better I show how christine is looking with one original and one NOS fender again. If you have questions about that don't hesitate to ask me.After finishing the body section there will be three more section you could follow in the future. There will be a paint section, Body and Interior reassembling section, electric and a power train section. |
Christines Body Page 14 of 22
Back to Overview Bodywork | Previous Page | Next Page
Old front floor LH already out
|
Sometimes those repro panels are fitting fine
|
Final measuring before welding
|
What ever it is???
|
Inner rocker completly out
|
A-pillar taken out
|
Cowl panel clamped back again to check
|
Firewall extension going in
|
Left torque box mostly out
|
Inside view everything primered again
|
Easy working without the inner rocker panel
|
Just see the numerous factory spotwelds to the torque box
|
Page 14 of 22
Trunklid alighment & Finish Wheelhouse
- Details
- Category: Restoration Section
- Published on Monday, 13 May 2013 16:57
- Written by Klaus
- Hits: 184017
Christines Restoration Pages
Trunklid alighment & Finish
|
Another hard part of the body restoration is waiting here for you! The inner rocker and also the lower part of the a-pillar has to come out. To make it looking better I show how christine is looking with one original and one NOS fender again. If you have questions about that don't hesitate to ask me. After finishing the body section there will be five more sections you could follow in the future. There will be a Paint , Body and Interior reassembling, Electric and a Power train section. |
Christines Body Page 19 of 22
Back to Overview Bodywork | Previous Page | Next Page
Old front floor LH already out
|
Sometimes those repro panels are fitting fine
|
Final measuring before welding
|
What ever it is???
|
Inner rocker completly out
|
A-pillar taken out
|
Cowl panel clamped back again to check
|
Firewall extension going in
|
Left torque box mostly out
|
Inside view everything primered again
|
Easy working without the inner rocker panel
|
Just see the numerous factory spotwelds to the torque box
|
Page 19 of 22